Miele CS 1011 Operating And Installation Instructions page 15

~
During installation, maintenance and repair work, the
hob must be disconnected from the gas supply and
mains electricity supply.
~
While the hob is under guarantee, repairs should
only be undertaken by a service technician authorised
by Miele. Otherwise the guarantee is invalidated.
~
Faulty components must only be replaced by
genuine Miele original spare parts. The manufacturer
can only guarantee the safety of the appliance when
Miele replacement parts are used.
~
If the connection cable is damaged, it must be
replaced by a suitably qualified electrician with a
special connection cable of type H 05 V V-F (pvc
insulated), available from Miele.
~
The hob is not intended for use with an external timer
switch or a remote control system.
~
Do not connect the hob to the mains electricity
supply by a multi-socket adapter or an extension lead.
These do not guarantee the required safety of the
appliance (e.g. danger of overheating).
~
Do not use the hob if it is faulty. Switch it off immedi-
ately and disconnect it from the mains electricity supply
and the gas supply. Call the Service Department.
Warning and Safety instructions
15