Table of Contents
Advertisement
The appliance is supplied right hand
hinged. If left hand door hinging is
required, follow the instructions below.
It is essential that the changing of
the door hinging is carried out by
two people.
In the following illustration the doors
are not shown in the closed position
to make it easier to see what
happens next.
Removing the door handle:
First the side section of the handle must
be removed:
^ Pull door handle a towards you. Side
section b slides back, creating a
gap d between side section b and
mounting plate c.
^ Place a suitable object (e.g. a spoon
handle) in gap d, and slowly lever
the handle towards the door.
Be careful not to let the "spoon
handle" slip, causing damage to the
appliance.
Changing the door hinging
The side section b can now be
removed.
^ Pull side section b out of the guides
on the mounting plate.
^ Undo the 4 screws (Torx 15) in the
mounting plate, and remove the
handle.
^ Remove the cover caps from the
opposite side, and fit them into the
empty holes.
To remove the doors
^ Close the lower appliance door.
^ Loosen screw a on the lower door
bearing b.
^ Open the lower door carefully, and
pull it downwards and off.
^ Take hinge pin c out of the door
bearing and place to to one side.
39
Hide quick links:
Advertisement
Table of Contents
