Miele KTN 12720 SD Operating And Installation Manual page 31

Frost free fridge freezer with dynamic cooling
Table of Contents

Advertisement

. . . the alarm sounds and the alarm
indicator light flashes.
The freezer is too warm, because
^ the freezer section door has been
opened too frequently, or large
amounts of fresh food have been put
in at once for freezing.
^ the ventilation gaps are blocked.
^ there has been a lengthy interruption
to the power supply.
Once the problem has been resolved,
the indicator light will go out and the
alarm will stop.
. . . the Super freeze indicator light
does not light up, even though the
appliance is working.
The indicator light is defective. Call the
Service Department.
. . . the interior lighting in the
refrigerator section is not working.
^ Make sure that the temperature dial
is not pointing to the "0" position.
If it is not pointing to the "0" position,
the lamp is defective:
^ Disconnect the appliance from the
mains. Switch off at the wall and
withdraw the plug from the socket, or
disconnect the mains fuse or remove
the screw-out fuse in countries where
this is applicable.
Problem solving guide
^ Press the sides of the lamp cover
forwards (1) and unhook the cover
(2).
^ Unscrew the lamp and replace it with
a new one.
Change the lamp.
Lamp specification:
220
- 240 V, E 14 fitting
See the old lamp for the Wattage
required.
^ Replace the cover by clipping it in at
the rear and then pressing it in at the
sides.
. . . the floor of the refrigerator is wet.
The drain hole is blocked.
^ Clean the condensate channel and
drain hole.
31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ktn 12720 sd-1

Table of Contents