Changing The Door Hinging - Miele FN 28262 ws Operating And Installation Instructions

The appliance is supplied with left-hand
hinging. If right-hand hinging is
required, the hinges must be changed.
Please note that the hinging must not
be changed if this appliance is going to
be installed side by side with another
refrigeration appliance.

Two people are needed for

changing the door hinging.

If a door seal is damaged or has
come out of the groove, the door will
not close properly and cooling
performance will be reduced.
Condensate will build up in the
interior and this can cause a build-up
of ice.
Do not damage the door seals and
ensure that they do not come out of
their groove.
Preparing to change the door hinging
To change the door hinging, you will
need the following tools:
 Place a suitable cover on the floor in
front of the appliance to protect the
appliance door and your floor from
damage.
Changing the door hinging
Removing the top covers
 Close the appliance door.
 Remove the cover  by sliding it
forwards from the back and then
lifting it off.
 Remove the cover  by pulling it
upwards.

Danger of injury when removing
the appliance door!
The appliance door is no longer
secure once the screws in the hinge
plate have been removed.
Hold the appliance door firmly.
55