Anti-Crease - Miele T 8822 C Operating Instructions Manual

Programmable functions

Anti-crease

Anti-crease helps prevent creasing, if
laundry is not normally removed
immediately after the end of a pro-
gramme.
The anti-crease function
– is activated when the tumble dryer is
delivered. You can shorten the
duration of the anti-crease phase or
deactivate it if wished.
– is used in all programmes except
Woollens handcare.
– should be left activated.
Follow the steps ( , ,
gramme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
Press the Start/Stop button and keep
it pressed in whilst carrying out steps
- .
Switch the dryer on.
Wait until the Start/Stop button lights up
constantly . . .
. . . and then release the Start/Stop
button.
Press the Low temperature button
twice.
– The Low temperature indicator light
will flash 3 times briefly.
52
A number to show which option is
selected will appear in the display
alternating with the letter P.
0 Anti-crease off
i 1 hour anti-crease
2 2 hours anti-crease
...) to pro-
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
^ Carry out steps
^ Switch the dryer off after step
(the Automatic plus indicator light will
also flash once).
(factory default setting)
(the Automatic plus indicator light will
also flash twice).
Pressing the Start/Stop button
switches between the options.
Switch the dryer off.
to .
.