Programmable Functions; Altering The Residual Moisture Level In The Cottons Programme - Miele T 8822 C Operating Instructions Manual

Programmable functions

Altering the residual moisture
level in the Cottons
programme
The tumble dryer is designed to dry
effectively using as little energy as
possible.
However, if you require the laundry to
be drier or damper, you can reduce
or increase the default residual
moisture in the Cottons programme.
Follow the steps ( , ,
gramme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
Press the Start/Stop button and keep
it pressed in whilst carrying out steps
- .
Switch the dryer on.
Wait until the Start/Stop button lights up
constantly . . .
. . . and then release the Start/Stop
button.
– The Low temperature indicator light
will flash once briefly.
50
A number to show which option is
selected will appear in the display
alternating with the letter P.
0 Increased residual moisture.
I Standard residual moisture
2 Reduced residual moisture.
...) to pro-
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
^ Carry out steps
^ Switch the dryer off after step
Laundry damper.
(factory default setting)
(the Automatic plus indicator light will
also flash once).
Laundry drier.
(the Automatic plus indicator light will
also flash twice).
Pressing the Start/Stop button
switches between the options.
Switch the dryer off.
to .
.