Ventilation Gaps - Miele KT 4353 SD ed Operating And Installation Manual

Never use cleaning agents
containing abrasive substances
such as sand, soda, acids or
chemical solvents. "Non-abrasive"
cleaning agents are also unsuitable
as they can cause matt areas to
appear.
For stainless steel surfaces, use a
proprietary stainless steel cleaning
agent.
Do not let water get into the
electronic unit, ventilation gaps or
into the light.
Do not let water get into the
drainage channel and drain hole
when cleaning.
Do not use steam cleaning
apparatus to clean the appliance.
Steam could reach the electrical
components and cause a short
circuit.
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service
call.
^ Switch the appliance off by turning
the temperature selector to "0" and
then switching off at the socket and
removing the plug.
^ Take any food out of the appliance
and store it in a cool place.
^ Defrost the freezer section.
^ Take out any removable parts, e.g.
shelves, for cleaning.
^ The stainless steel trim can be taken
off the front of the shelves for
cleaning.
^ Clean the refrigerator section at least
once a month and the freezer section
each time it is defrosted. Use warm
water will a little washing up liquid.
^ Accessories and shelves should all
be hand-washed. The butter dish is,
however, dishwasher safe.
^ Clean the condensate channel and
drain hole frequently, so that
condensate can drain away
unhindered. Use a straw or similar to
clear the drain if necessary.
^ Clean stainless steel surfaces with a
suitable cleaning agent, following the
manufacturer's instructions on the
packaging.
^ After cleaning, wipe the interior and
accessories with a damp cloth and
dry with a soft cloth. Leave the doors
open to air the appliance for a short
while.
A microfibre "E-Cloth" is available from
the Miele UK Spare Parts Department,
which is suitable for cleaning surfaces
such as stainless steel, glass, plastic
and chrome without the use of
chemicals.
23