Dynamic Cooling M - Miele KT 4353 SD ed Operating And Installation Manual

The Super freeze function will switch off
automatically after approx. 50 hours.
The indicator light goes out and the
appliance continues running at normal
power.
To save energy the Super freeze
function can be switched off once a
temperature of -18 °C or
colder has been reached in the freezer.
^ Press the Super freeze button. The
Super freeze indicator light will go
out,
and the appliance will continue to
operate at normal power.
When the Dynamic cooling function is
not switched on, the natural circulation
of air in the appliance will cause
different temperature zones in the
refrigerator as the cold, heavy air will
sink to the lowest section of the
appliance. You should bear this in mind
when placing food in the appliance
(see "Using the refrigerator efficiently").
However, if you are placing a large
amount of food in the refrigerator at any
one time, it is a good idea to switch on
Dynamic cooling. This way you can
distribute the temperature inside the
appliance to all areas more evenly so
that all the food will be chilled to about
the same degree.
The temperature is set as normal with
the temperature control.
Dynamic cooling should also be
selected when:
14
m
– the ambient temperature in the room
is high (above approx. 30 °C), and
– the room humidity level is high.
^ Press the Dynamic cooling button
m. The Dynamic cooling indicator
light will come on.
Make sure the fan at the back of the
appliance is not restricted to ensure
unhindered air circulation.
When Dynamic cooling is switched on,
the appliance uses more energy. It
should therefore be switched off when
the room temperature is below 30 °C
and when humidity levels are normal.
^ Press the Dynamic cooling button
m. The Dynamic cooling indicator
light will go out.