Table of Contents
Advertisement
Condensate and frost can build up on
the back wall of the refrigerator section
whilst it is in use. These are
automatically removed and defrosted
by the appliance.
The condensate is drained away via a
channel and drain hole into an
evaporation system at the back of the
appliance.
Ensure that the condensate channel
and drain hole are kept clean and
are never blocked so that
condensate can flow away without
hindrance.
The freezer section does not defrost
automatically because frozen food must
not be allowed to defrost.
In normal use, ice and frost will form on
the evaporator plates. If allowed to
accumulate, this will impair the
efficiency of the freezer and increase
the consumption of electricity.
Do not scrape ice and frost off an
evaporator plate as this can damage
it and make the freezer unusable.
The freezer section should be defrosted
from time to time. It must be defrosted if
a layer of ice approx. 5 mm thick has
accumulated. It is best to defrost when
only very little food or no food at all is
left in the freezer.
^ Remove the frozen food from the
freezer and place it in another freezer
or cool box, or wrap it in several
layers of newspaper or cloths.
^ Store it in a cool place until the
freezer is ready for use again.
21
Hide quick links:
Advertisement
Table of Contents
