Table of Contents
Advertisement
Operating in a room which is too cold
will cause the cooling system to switch
off for too long causing the freezer
section to become too warm.
Use a blunt instrument, e.g. a spoon
handle or plastic scraper, to prise it
apart carefully.
^ Check whether the freezer section
door closes properly.
^ Defrost and then clean the freezer
section.
Too thick a layer of ice reduces
efficiency and increases energy
consumption.
^ Has the contact switch become
stuck?
^ Make sure that the temperature
selector is not pointing to the "0"
position.
If it is not pointing to the "0" position,
the lamp is defective:
^ Disconnect the appliance from the
mains. Switch off at the wall and
withdraw the plug from the socket, or
disconnect the mains fuse or remove
the screw-out fuse in countries where
this is applicable.
26
^ Press the sides of the lamp cover
inwards (1), disengage the cover (2)
and unclip it at the rear.
^ Replace the lamp.
Lamp specification:
220 - 240 V, max. 25 W, E 14 fitting.
^ Screw the new lamp into the
connection. Ensure it goes in
correctly.
^ Replace the cover by clipping it in at
the rear and then pressing it in at the
sides.
Hide quick links:
Advertisement
Table of Contents
