Installation - Miele T 586 C Operating Instructions Manual

Installation

The machine must be perfectly level to
ensure safe and proper operation.
Minor differences do not, however,
have an adverse effect on operation.
The screw feet can be adjusted to
compensate for any uneveness in
the floor surface.
24
Important
The ventilation slots beneath the door
must not be blocked by deep pile car-
pet, plinths etc., as this will prevent a
sufficient intake of cold air.
Building under
It is possible to install this appliance
under a continuous worktop in a kit-
chen run:
A special building under kit * is re-
quired. The machine lid must be re-
placed by a cover plate.
This must be fitted by a suitably com-
petent person exactly according to
the fitting instructions to ensure elec-
trical safety.
Fitting instructions are included with
the kit.
For installation under a work surface
900/910mm from the floor, a spacer
kit * is required.
Connection to electricity should be
made in such a way that it remains ac-
cessible when the machine is in place.
* These items are all available from
your Miele Dealer, or the Miele Domes-
tic Sales Dept.