Programmable Functions - Miele T 586 C Operating Instructions Manual

Two additional functions can be pro-
grammed if required:
Child safety feature for programme
selection (P 1 )
This feature is pre-programmed ex-
works as standard.
After the "START" touch pad has been
pressed it is not possible to change the
programme.
The only way to change the pro-
gramme is to switch off and start again.
Altering the degree of drying (P 2 )
If you would prefer your washing to be
drier at the end of a programme, you
have the facility to reduce the degree
of residual moisture slightly in the fab-
rics for all programmes.
It is not possible to alter just one pro-
gramme.
This is not pre-programmed ex-works.
To select programming mode:
The machine must first be switched
off and the door closed.
Under the "Minimum iron" field press
and hold in the "Normal +" and
"Hand iron" touch pads, while at the
same time switching on the machine
with the On/Off button.
"P " appears in the Time display.
The individual function(s) can now be
selected and programmed in.

Programmable functions

To call up and store the required pro-
grammable function(s):
Press the > touch pad under the Time
display once for P 1 or twice for P 2 .
To move from P 2 to P 1 press the
$ touch pad.
In the left of the display field "P " and
the number of the selected function
appear alternately. In the right of the
display field there appears
"0 " if the function is not programmed,
"1 " if the function is programmed in.
If you need to change from one to the
other press the "START" touch pad.
After the required function has been se-
lected and programmed:
Switch off the machine using the "On-
Off" button. The programmable func-
tion(s) is/are stored.
To cancel a programmable function:
Call up the programmable function in
question.
Press the "START" touch pad to dese-
lect, i.e. to bring up "O ".
Switch off the machine using the "On-
Off" button.
13