Downtime After Installation - Miele TXD 160 WP Operating Instructions Manual

Downtime after installation


Damage caused by switching the
appliance on too soon.
This can damage the heat pump.
After setting up the tumble dryer,
wait for at least one hour before
starting a drying program.
Removing the protective film
and stickers
 Remove:
- any protective film from the door
- any stickers from the front and from
the lid
Please do not remove any labels
(e.g., the data plate) which are visible
when you open the door.
Setting up Miele@home
There are 2 ways of connecting:
1. via the Miele@mobile app (default)
2. via WPS
To do so, you will need a WPS-
compatible router.
Logging in via the Miele@mobile app
The Miele@mobile app can be used to
connect to your network.
 Turn the program selector to
MobileStart .
 appears on the time display and
the timeout starts to count down from
10 minutes. The Miele@mobile app will
guide you through the remaining steps.
When you have successfully connected,
 will appear on the time display.
Initial set-up
21