Caring For The Environment - Miele T 586 C Operating Instructions Manual

Guide to the appliance
The drying system
The sensitive system automatically ad-
justs drying to suit the water quality,
and makes more exact drying possible.
The water conductivity is measured,
and registered by the control which
then compensates to achieve a uniform
residual moisture level.
The Novo Super control offers 9 pro-
grammes with electronic moisture
measuring and 2 timed programmes.
The automatic reversing action turns
the drum clockwise and anti-clockwise
to loosen the laundry and prevent
damp patches and thus ensures even
drying results.
Energy saving tips
Make sure that your laundry is thor-
oughly spun before drying. You will
save up to 35% energy and time if
laundry is spun at 1600 rpm instead of
at 600 rpm.
Load according to the optimum am-
ount of washing for the programme to
be selected. Underloading is unecon-
omical. Overloading gives a poorer
quality of drying and may cause un-
necessary creasing.
Before using for the first time
Important: The appliance must be
properly installed and connected to
the electricity supply.

Caring for the environment

Disposal of the packing material
The packaging used to protect the ma-
chine during transport largely consists
of the following recyclable materials:
- Corrugated paper/card
- Polystyrene - CFC-free
- Polyethylene foil - transparent
- Fibreboard (solvent free)
- Untreated wood
- Packaging straps: Polyamide (blue)
Polypropylene (black),
Rather than just throwing these ma-
terials away please take them to the
nearest collection point for specific
waste.
Disposal of your old appliance
Old appliances contain materials which
can be recycled. Please contact your
local authorities or scrap merchant
about potential recycling schemes, be-
fore disposing of the appliance. Fold
page out to refer to the appliance and its
controls.
5