Venting System With Plastic Piping - Miele T 4362 Operating Instructions Manual

b Venting system with plastic
piping
Plastic piping is a good option where
the vented air has to ducted for some
distance. The smooth walls of the
pipe create less friction for the
vented air than the walls of a flexible
vent hose, for example. Time and
energy consumption are better with
plastic piping.
The following items are required:
– An adapter* (C 100 mm).
– a wall vent kit* or window vent kit*.
– Suitable piping (C 100 mm) is
available from your dealer or builders
merchants. Where the pipe diameter
is more than 100 mm, an adapter is
necessary (e.g. from C 100 to 125
mm) to connect the pipe to the dryer.
* Available as an optional accessory
from your Miele dealer or the Miele
Spare Parts Department.
^ The ducting (2) is connected to
adapter (1) which is fitted into the
vent opening on the dryer.
Installation - venting
Example
1. Wall vent kit
(Separate fitting instructions are
supplied with the Miele wall vent kit).
2. Adapter
3. Plastic piping, diameter DN 100
39