Problem Solving Guide; General Problems - Miele T 4362 Operating Instructions Manual

With the help of the following notes minor faults in the performance of the
machine, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,
Repair work to electrical equipment should only be carried out by a suitably
qualified person in accordance with local and national safety regulations.
Repairs and other work by unqualified persons could be dangerous. The
manufacturer cannot be held liable for unauthorised work.

General problems

Problem
The tumble dryer fails to
start when switched on.
Items made of synthetic
fibres are charged with
static electricity after
drying.
Possible cause
No obvious cause.
Synthetic fibres tend to
attract static charge.

Problem solving guide

Remedy
– Have you followed the
switch-on procedure
correctly (see "How to
dry correctly")?
– Is the plug correctly
inserted in the socket
and switched on?
– Is the door closed
properly?
– Has the fuse or circuit
breaker tripped?
Static charge can be
reduced by adding a
fabric conditioner to the
final rinse in the washing
machine or a fabric
conditioner sheet to the
load in the dryer.
23