Table of Contents
Advertisement
^ Clean the inside of the appliance and
the accessories with warm water and
a little washing up liquid and then dry
with a soft cloth.
Important:
To ensure correct functioning of the
appliance, let it stand for between ½
and 1 hour after transporting it to its
final location before connecting it to
the mains. This is important for the
correct functioning of the appliance.
^ Using a coin, turn the On/Off dial in a
clockwise direction away from the "0"
position.
Forcing it beyond its range will
damage it. Turn it only as far as it will
go, then turn it back again.
The in-operation and the alarm
indicator lights come on and the
appliance starts cooling.
Allow the appliance to run for a few
hours before placing food in it. This will
ensure that the temperature is
sufficiently low.
The higher the setting, the lower the
temperature in the appliance.
10
^ Using a coin, turn the On/Off dial in
an anti-clockwise direction back to
the "0" position.
All indicator lights go out and the
cooling process is switched off.
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday,
^ switch the appliance off at the mains,
^ take out the plug (pull on the plug
and not the cable),
^ defrost and clean the appliance out
and
^ leave the door ajar to air the
appliance.
If, during a long absence, the
appliance is switched off but not
cleaned out and the door is left shut,
mould and odours are likely to build
up inside the appliance.
Advertisement
Table of Contents
