Download  Print this page

Ventilation; Installation - Miele F 7102 S Operating And Installation Manual

Hide thumbs


Repairs to electrical appliances
should only be carried out by a
suitably qualified and competent
person in accordance with local and
national safety regulations. Repairs
and other work by unqualified
persons could be dangerous.
The following can be corrected without
contacting the Miele Service
^ Check to see whether any pieces of
furniture next to the appliance are
vibrating whilst the appliance is in
Switch the appliance off then:
^ Check whether the appliance is
aligned correctly.
^ Check whether all parts at the rear of
the appliance are free from
hindrance. Remove any hindrance.
^ Check whether the cable clips were
unclipped from the back of the
appliance before installation. They
could vibrate when the appliance is
^ Are all removable parts securely
located in the appliance?
Remember that the noise of the
compressor and the coolant circulating
in the system is unavoidable.
^ Make sure that the temperature dial is
not pointing to the "0" position.
^ Check that the plug is correctly
inserted in the socket.
^ Check that the fuse is not defective
and that the mains fuse has not
blown. If it has, contact the Miele Ser-
vice department.
This is not a fault. The suction caused
by opening and closing the door is
preventing the door from opening. Wait
a few minutes and then try again. It
should now open without force.
^ Turn the temperature dial to a setting
closer to "0".
^ The super freeze function has not
been switched off. The indicator light
is still on.
^ Check whether the ventilation grilles
have been covered over or become
too dusty.
^ Check whether, the metal grille (heat
exchanger) at the rear of the
appliance has become too dusty.
^ The door has been opened too
frequently, or a large amount of fresh
food has been put in at once for



  Related Manuals for Miele F 7102 S