Fitting A Furniture Door - Miele F 623 Ui-2 Operating And Installation Manual

Installing the appliance
If there is a continuous plinth in the
kitchen a ventilation gap will need to be
made in the plinth for the appliance:
Building-under
height [mm]
820
870
The ventilation gaps must not be
covered over.
36
Dimension H
[mm]
60+1
110+1

Fitting a furniture door

^ A gap of 8 mm must be maintained
between the appliance door and the
fixing bracket.
^ Push fitting aids a up to the height of
the furniture door: the lower edge X
of the fitting aids must be at the same
height as the upper edge of the
furniture door being fitted, see - on
the diagram.
^ Undo nuts b and take fixing bracket
c off together with the fitting aids.