Changing The Door Hinging - Miele F 1354 S Operating And Installation Manual

Changing the door hinging

The appliance is supplied right-hand
hinged. If left-hand door hinging is
required follow these instructions.
^ Close the appliance door, unscrew
hinge bracket b, and take the door
off.
^ Take hinge pin c out of the hinge
bracket, then refit it in the second
hole in the hinge bracket. (Use the
spanner supplied to unscrew and
refit the hinge pin).
^ Remove cover a and use it to cover
the now empty holes on the opposite
side.
34
^ Use the spanner supplied to unscrew
upper hinge pin d and refit it on the
other side.
^ Remove stoppers f, and unscrew
handle e. Refit the handle on the
other side of the door.
^ Then refit stoppers g on the opposite
side of the door.
^ Hang the door on the upper hinge
pin and close the door.
^ Fit hinge bracket b in the lower door
bearing. Then screw it securely to the
appliance plinth.
Use the long slots in the hinge
bracket to align the door. Make sure
you have tightened all screws
properly.