Installing The Oven - Miele H 348 B2 Operating Instructions Manual

The appliance must not be operated
until it has been correctly installed in
its housing unit. Otherwise it poses
an electric shock hazard.
Important:
Do not fit insulation material inside
housing unit. This would hinder the
intake of air to the appliance.
Important:
Remove the protective cork spacers
from the sides of the oven before
installation.

Installing the oven

Turn off the mains electricity supply
to the isolator.
^ Connect the oven to the electricity
supply by the isolator.
^ Place the oven into the oven housing
unit as far as the oven trim and align.
^ Open the oven door and using four
screws secure the oven to the side
walls of the housing unit through the
holes in the oven trim.
The appliance must only be
operated when it has been built in.
55