The Dishwasher Does Not Fill/Drain - Miele G 1182 Operating Instructions Manual

Problem solving guide

The dishwasher does not fill/drain.

Problem
The dishwasher
stops working
shortly after the start
of the programme.
The buzzer sounds.
The Inlet/Drain
indicator flashes
when the door is
opened.
The dishwasher
stops during a
programme.
The buzzer sounds.
The Inlet/Drain check
indicator flashes
when the door is
opened.
46
Possible cause
The stopcock is
closed.
Water intake is
restricted.
Water outlet is
restricted, water
remains in the
wash cabinet at
the end of a
programme.
Remedy
– Open the stopcock fully.
Before rectifying the problem you
must:
– Switch the dishwasher off with the
Off button V.
– Open the stopcock fully.
– Clean the water inlet filter (see
"Maintenance").
– The water pressure at the intake is
lower than 30 kPa (0.3 bar).
Seek professional advice.
– Clean the filter combination. See
"Cleaning and care".
– Clean the drain pump. See
"Maintenance".
– Clean the non-return valve. See
"Maintenance".
– Remove any kink in the drain
hose.