Cooling Fan Run-On; Start; Recommended Temperatures; Mw Power Levels - Miele H 4081 BM SuperVision Operating Instructions Manual

Cooling fan run-on

You can select either a temperature or a
time controlled fan run-on.
The fan will then switch off
automatically if the temperature in the
oven is 70 °C (temperature controlled)
or after approx. 20 minutes (time
controlled).

Start

Programmes can be started
automatically or manually. Microwave
programmes can only be started
manually.
The automatic setting enables a
programme to start automatically
without having to select Start. With the
manual setting, you have to select and
confirm "Start".

Recommended temperatures

This setting calls up the recommended
temperatures for the traditional oven
functions and also the microwave
combination programmes. These can
be changed.

MW power levels

You can alter the recommended power
levels for solo programmes and for
combination programmes using
microwave heat.

Display

You can set the display contrast and
display brightness.

Buzzer tones

There is a choice of different tones and
volumes.
The "Melody" option offers you different
sounds for the minute minder tone and
the cooking duration tone. This means
you will be able to differentiate between
the minute minder tone and the tone
which indicates that a programmed
cooking duration has finished if you are
using both at the same time.
The length of the tone can also be set
to allow you to differentiate between a
short tone and long tone.
You can also deactivate the tone which
sounds each time a sensor is pressed.

Safety (System lock)

Call up the Safety menu to display the
System lock option.
By activating this option you can
prevent the appliance from being used.
You can change from "Off" to "On". A
lock symbol will then be visible on the
right hand side of the bottom line of the
display. The lock symbol will be open
when the system is unlocked and
closed when the system is locked. If
you select the lock symbol, you can
open or close it. You can still use the
minute minder.
The system lock will remain activated
even after a power cut.

Units

You can alter the units, namely the
weight from kg to lbs and the
temperature from °C to °F.
Settings J
35