Miele H 4081 BM SuperVision Operating Instructions Manual page 29

Using the residual heat, Energy-save
function
Shortly before the end of a programme
using a traditional function the oven
heating will be switched off
automatically.
The residual heat is sufficient to finish
cooking.
Using the residual heat in the oven
saves energy.
"Energy save phase" will appear in the
display to show that the oven is in
energy save mode. The actual
temperature is no longer visible.
The cooling fan continues to run, as
does the hot air fan if a "fan" setting had
been chosen.
Programming cooking times
To check and change an
entered time
It is possible to check or change times
entered for a cooking programme at
any time by calling up the relevant
function.
To delete a set time
^ Touch the ON/OFF sensor.
If there is a power cut, all data entered
will be deleted.
29