Table of Contents
Advertisement
Flash Memory Programming
The FRUU is available from these locations:
Table A-2. FRUU Locations and Descriptions
FRUU Location
Run the FRUU on diskettes
created from:
• The Windows autorun
menu of the RAID
Software Suite CD-ROM
• The 'Create Diskettes'
option from the bootable
CD
Run the FRUU directly from
the bootable RAID Software
Suite CD-ROM
A.4.1
Creating Firmware Diskettes from the CD-ROM Autorun
Menu
1. Insert the RAID Software Suite CD-ROM into a Windows computer.
2. After the Main Menu loads automatically, click 'Utility Diskettes.'
3. Click 'Firmware Recovery Utility.' A DOS window will display prompting you to
insert a blank floppy diskette.
4. Insert the blank diskette, then press <Enter>.
5. After the file transfer is complete, remove the diskette from the computer and label it.
6. Insert a second blank diskette into the computer.
7. Download the latest firmware file from http://www.icp-vortex.com or http://
www.vortex.de and copy it to the second floppy diskette. Proceed to
information on running the FRUU.
OR
Click Firmware Diskette to get the firmware file from the RAID Software Suite CD-
ROM, then complete the remaining steps in this procedure.
8. Click 'Firmware Diskette.' A DOS window will display prompting you to insert a
blank floppy diskette.
9. Verify that a blank diskette is inserted, then press Enter.
26
Create the two diskettes described
below and then boot the computer with
diskette 1:
• Diskette 1—The bootable Firmware
Recovery and Update Utility
(FRUU).
• Diskette 2—The firmware file. You
can:
— Create the firmware diskette
OR
— Download the latest firmware
Boot directly from the RAID Software
Suite CD-ROM to update or recover the
firmware image on the controller with the
original firmware file that shipped on the
CD.
Summary
from the firmware file that is on
the CD-ROM.
OR
file from http://www.icp-
vortex.com or http://
www.vortex.de.
Hardware Installation and User's Guide
More Information
• See
Section A.4.1
to create the
diskettes from the
Windows autorun
menu.
• See
Section A.4.2
to create the
diskettes from the
Bootable RAID
Software Suite
CD-ROM.
• See
Section A.4.3
for information on
running the FRUU.
See
Section A.4.3
for
information on running
the FRUU.
Section A.4.3
for
Advertisement
Table of Contents
