Anti-Slip Mat - Miele EGW 4060-14 Operating And Installation Manual

Titanium finish fronts
Titanium surfaces have a velvety finish
which does not show fingerprints.
Clean as you would glass or porcelain.
The appliance front is susceptible to
scratches and abrasions.
Do not use:
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners.
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents,
– sharp metal tools,
– oven sprays.
Stainless steel fronts
The appliance front is susceptible to
scratches and abrasions.
Stainless steel surfaces can be cleaned
using a Miele E-Cloth or with a
proprietary non-abrasive cleaning
agent designed specifically for use on
stainless steel. N.B. Do not use
stainless steel cleaning agents on the
controls.
Do not use:
– cleaning agents containing soda,
acids or chlorides,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
Cleaning and care
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents.
To help prevent re-soiling, a
conditioning agent for stainless steel,
such as Neoblank (available from the
Miele Spare Parts Department), can
also be used.
Follow the manufacturer's instructions.

Anti-slip mat

The anti-slip mat can be removed from
the drawer for cleaning.
The mat is best cleaned by hand using
warm water with a little washing-up
liquid. Dry it thoroughly. Do not put the
anti-slip mat back into the drawer until it
is completely dry.
Never dry the anti-slip mat in the
oven. Fire hazard.
15