Table of Contents
Advertisement
Installation
Safety instructions for
installation
Before connecting the appliance to
the mains supply make sure that
the voltage and frequency correspond
to the rating on the data plate.
This data must correspond in order to
avoid the risk of damage to the
appliance. Consult a qualified
electrician if in any doubt.
The socket and on-off switch
should be easily accessible after
the appliance has been built in.
The plate warmer may only be built
in in combination with those
appliances quoted by the manufacturer
as being suitable. The manufacturer
cannot guarantee trouble-free operation
if the appliance is operated in
combination with appliances other than
those quoted by the manufacturer as
being suitable.
When building in the plate warmer
in combination with another
suitable appliance, the plate warmer
must be fitted above a fixed interim
shelf in the housing unit to ensure that
the housing unit can support both its
weight and that of the other appliance.
As the combination appliance is
placed directly on top of the plate
warmer once it is built in, an interim
shelf is not necessary between the two
appliances.
18
When building in the combination
appliance, it is essential to follow
the instructions given in the operating
and installation instructions supplied
with it.
This equipment may only be used
in mobile installations such as
ships, caravans, aircraft etc. if a risk
assessment of the installation has been
carried out by a suitably qualified
engineer.
Niche dimensions
There a two different plate warming
drawers which differ in height. The
building-in dimensions for the plate
warmer must be added to the
building-in dimensions for the
combination appliance to establish the
niche size required.
All dimensions in this instruction booklet
are given in mm.
Hide quick links:
Advertisement
Table of Contents
