Operating and Installation instructions Built-in plate warmer EGW 601-14/EGW 601-29, EGW 602-14/EGW 602-29 EGW 604-14/EGW 604-29 GZWOXHr It is to read these instructions before installing or using the machine, to avoid the risk of accident, or damage to the machine.
......... 3 .
a On/Off switch (lights up) b Temperature control c Warming drawer d Non-slip mat e Rail f Indicator light on the appliance front...
Old appliances contain materials which can be recycled. Please contact your The transport and protective packing dealer, your local waste collection cen- has been selected from materials which tre or scrap merchant about potential are environmentally friendly for disposal recycling schemes. and can normally be recycled.
This appliance complies with all rele- The Miele plate warmer is available vant legal safety requirements. Im- in two different heights for build- proper use of the appliance can, ing-in in conjunction with Miele appli- however, present a risk of both per- ances.
Installation work and repairs may only be carried out by a suitably Before connecting the appliance to qualified and competent person in the mains supply make sure that accordance with national and local the voltage and frequency correspond safety regulations. Repairs and other to the rating on the data plate, other- work by unqualified persons could be wise the appliance could be damaged.
Under no circumstances use a steam cleaner to clean this appli- The interior of the plate warmer ance. The steam could attack the elec- drawer can reach temperatures of trical components and cause a short up to about 80 °C depending on the circuit.
The plate warmer is intended exclu- sively for Do not use the appliance to re-heat, cook or keep food or drinks warm. The condensation from the food / drinks could lead to moisture dam- age in the appliance. The appliance operates with a .
of between approx. 30 and 80 °C can be set. The appliance is switched on using the Items to be heated can be divided into two general groups: To switch on: – Cups / glasses ^ Press the On / Off switch. The switch –...
– Crockery for 6 people: – Crockery for 12 people: 6 dinner plates Ø 28 cm 12 dinner plates Ø 28 cm 6 soup bowls Ø 10 cm 2 dishes Ø 22 cm 1 dish Ø 22 cm 2 dishes Ø...
Various factors will affect the heating up times: Do not use the plate warmer to – material and thickness of the re-heat, cook or keep food or drinks crockery warm. The condensation from the food / drinks could lead to moisture –...
Remove any soiling straight away. The appliance front and controls are A microfibre "E-Cloth" is available from susceptible to scratches and abrasion. the Miele UK Spare Parts Department, Part number 98013530, which is suit- Avoid: able for cleaning surfaces such as –...
The appliance front and controls are The mat can be removed to clean the susceptible to scratches and abrasion. bottom of the drawer. Stainless steel surfaces can be cleaned Clean the mat by hand with a solution using a proprietary non-abrasive clean- of hot water and a little mild washing up ing agent designed specifically for use liquid.
The times stated are only given as a Installation, maintenance and repairs guide. As you use the plate warmer you to the electrical components of this will get to know which setting suits your appliance should only be carried out own needs best.
– your Miele dealer are shown on the data plate which is next to the control panel. – the nearest Miele Service Depart- ment, (see address on the back page). Please note that telephone calls may be monitored and recorded to im- prove our service.
given on the data plate located beside It is essential that the electrical in- the control panel. Ensure these match stallation instructions for any appli- the household mains supply. ance which is fitted in combination Connection of this appliance should be with the plate warmer are also ob- made via a fused connection point served.
This appliance is supplied with a 3-core Data relating to electrical connection cable (approx. 1.5 m long) for connec- will be found on the data plate located tion to a single phase 230-240 V 50 Hz beside the control panel. Make sure supply.
Please quote these data, and the model and serial number when contacting the The Built-in plate warmer is supplied Miele Service dept. with a mains cable for connection to an a.c. single phase 230 V, 50 Hz electric- Connection of this appliance should be ity supply.
It is essential to read the operating The plate warmer may only be built-in and installation instructions for any with one of the following Miele appli- other appliance fitted in combination ances: with the plate warmer. – Built-in oven (60 cm wide)
The plate warmer may only be built-in with one of the following Miele appli- ances: – Built-in oven (60 cm wide) series H 310 onwards – Steam oven – Coffee machine...
The plate warmer must be fitted above a fixed interim shelf in the housing unit to ensure that the hous- ing unit can support the weight of it and of any other appliance installed in combination with it. When fitted in combination with an- other appliance, the plate warmer must always be fitted as the lower of the two appliances.
^ Remove the protective foil from the adhesive strips. After building in the combination appli- ance, it may be necessary under cer- tain circumstances to – align the front of the plate warmer. – align the gap between the plate warmer and the combination appli- ance.
Alteration rights reserved / 3902 M.-Nr. 05 431 811 / V02 This paper consists of cellulose which has been bleached without the use of chlorine.