Page 1
Operating and Installation Instructions Built-in Plate Warmer EGW 2062 en - US, CA To prevent accidents and appliance damage read these instructions before installation or use. M.-Nr. 07 342 340...
IMPORTANT SAFETY INSTRUCTIONS WARNING- When using your appliance follow basic precautions, including the following: Read all instructions before installation or use to prevent injury and appliance damage. This appliance conforms to all uniform safety codes and regulations. Read all operating and installation instructions for appliances installed in combination with the plate warmer.
Page 5
Installation, repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty. IMPORTANT SAFETY INSTRUCTIONS...
Page 6
Pressurized steam may cause permanent damage to the surface and to components of the appliance. To prevent injuries, do not use accessories not recommended by Miele. SAVE THESE INSTRUCTIONS AND REVIEW THEM PERIODICALLY...
Before using for the first time Clean the appliance ^ Remove any protective wrapping. ^ Remove the non-slip mat and clean with a solution of warm water and liquid dish soap. Dry with a soft cloth. ^ Clean the plate warmer, inside and out, with a damp cloth and wipe dry.
The plate warmer is only intended for warming dishes. Do not use the plate warmer to reheat, cook or keep food and drinks warm. Condensation from food or drinks could cause moisture damage to the appliance. Use pot holders when removing dishes. The drawer can hold a maximum of 33 lbs (15 kg).
Using the plate warmer Operating ^ Place the dishes in the plate warmer. ^ Select a temperature. ^ Turn the appliance on (j). The On/Off button will light. ^ Close the drawer. ^ The indicator at the front of the appliance drawer lights showing that the unit is on.
Warming times Various factors will affect the warming times: – type and thickness of the dishes, – quantity, – how the dishes are arranged, and – the temperature setting. As you use the plate warmer you will learn which settings suit your needs best.
Cleaning and care Allow the appliance to cool before cleaning. Do not use a steam cleaner to clean this appliance. Pressurized steam could penetrate electrical components and cause a short circuit. Do not use commercial cleaning agents. Only use agents recommended for domestic use.
Repairs should only be carried out by an authorized technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or appliance damage. The dishes are not warm enough. Possible fault The appliance is turned off. The wrong temperature was selected. The dishes need more time to warm.
Miele Service department, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele. Our goal is to prevent unauthorized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home.
Installation Instructions IMPORTANT: SAVE FOR THE LOCAL ELECTRICAL INSPECTOR'S USE To prevent accidents and appliance damage read these instructions before installation or use.
However, under certain conditions it may be possible for an installation in these applications. Please contact the Miele Technical Service Department with specific requirements. Note to the installer: Please leave these instructions with the consumer of the appliance for the local building inspectors use.
Installation dimensions Miele appliances can be installed flush or proud. Discuss your installation requirements with your architect, designer and installer. Combination with Coffee system * Machine with glass front ** Machine with stainless steel front Installation...
Installation Installing the appliance ^ Set the plate warmer into the niche, push is all the way in. Be sure that is it aligned it at a right angle. ^ Open the drawer and fix the appliance with the two supplied screws at the side panels of the cabinet.
Installation Aligning the appliance front After installing the combination appliance it may be necessary to align the appliance front and/or even the gap between the plate warmer and the combination machine. Flat washers are supplied beneath the knurled nuts, which fix the drawer to the telescopic runners.
Electrical connection CAUTION: Before servicing, disconnect the power supply by either removing the fuse, shutting off the power main or manually "tripping" the circuit breaker. Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards.
Disposal of packing materials The cardboard box and packing materials are biodegradable and recyclable. Please recycle. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Help protect our environment Disposal of an old appliance Old appliances contain materials that can be recycled.
Page 24
Alteration rights reserved / 1609 M.-Nr. 07 342 340 / 01 For the most updated manual see the Miele web site.