Building Into A Wall Unit - Miele SE 213 Operating Instructions Manual

Installation
To install a control unit at "eye level" a
special accessory kit is required for
connection to the hob.
This unit is obtainable from your Miele
dealer, or the Miele Spare Parts dept,
and consists of a 3.5 metre long con-
necting cable and an additional con-
nector box.
18
For some control units two cable and
connector box accessory kits are re-
quired:
KSE 200
KSE 202
KSE 204
The cable should be in conduit ap-
proved by the electricity regulatory
bodies. Only a suitably competent
person should install the connecting
cable from the control unit to the
hob.
1
2
2