Table of Contents
Advertisement
Fit the hob plugs into the sockets.
Feed the connection cable without a
plug through a suitable hole in the
base unit. Connect to the electricity
supply with an isolator which com-
plies with national and local regula-
tions.
16
When pushing the control unit into
place, ensure that no connecting
cables are crushed or caught.
The mains cable must not come into
contact with the underside of the
hob. Pull any superfluous cable
away from the space behind the
control unit when it is pushed in.
Push the control unit into the retain-
ing plate.
The pins of the control unit must se-
curely fit into the retainers on the re-
taining plate.
Fit the protective shelf under the con-
trol unit and secure it.
The appliance must only be oper-
ated when it has been built-in.
Advertisement
Table of Contents
