Programming - Miele KM 5722 Operating And Installation Instruction

You can change the standard settings
of your hob.
^ With the hob switched off, touch the
hob ON/OFF sensor s and the
booster sensor B at the same time,
until P (Programme), S (Status) and
numbers appear in the cooking zone
display. These show the current
setting.
To set the programme:
^ Touch the front left cooking zone
sensor.
The relevant number will begin to flash.
^ Touch the + or - sensors to set the
required programme.
Programme
P 0 Demonstration mode and factory
default settings
P 1 Keypad tone when a sensor is
touched
* The factory default settings are shown in bold.
To set the status:
^ Touch the front right cooking zone
sensor.
The relevant number will begin to flash.
^ Touch the + or - sensors to set the
required status.
To store the new settings in memory,
touch the B sensor until the displays go
out.
If you do not wish to store the settings
in memory, touch the ON/OFF sensor
until the displays go out.
Status* Setting
S 0 Demonstration mode on
Demonstration mode off
S 1
S 9 Factory default settings
reinstated
S 0 Off
S 1 On

Programming

29