Electronic Programme Locking - Miele WT 2679 WPM Operating Instructions Manual

Altering the spin speed
^ Press the OK button. The spin speed
will be shown highlighted. You can
use the – and + buttons to change
the spin speed up until the final spin
begins.
You can change the thermospin
speed up until the thermospin
begins.
Altering the drying level / drying time
You can alter the drying level or drying
time during the washing programme but
not once the drying programme has
started.
Selecting or deselecting a drying
programme
You can select or deselect the drying
function during a washing programme if
this is permitted for the particular
programme.
Changing extra options
It is possibe to select or deselect the
Short and Water plus extra options up
to 5 minutes after the washing
programme has started.
The buzzer can be switched on or off at
any time.
Please note that no changes are
possible if programme locking has
been activated.
Changing the programme sequence

Electronic programme locking

Programme locking prevents the
machine from being opened or the
programme cancelled during a
washing or drying programme.
To activate programme locking
^ Once the programme has started,
press the Start/Stop button for at least
6 seconds until the following appears
in the display:
X
The machine will now not accept any
changes and the programme will
proceed through to the end.
Programme locking is deactivated
automatically at the end of the
programme.
Deactivating programme locking
early
^ Press the Start/Stop button for at least
6 seconds until the following appears
in the display:
W
Locked
Ready
45