Problem Solving Guide; What To Do, If; Troubleshooting; The Programme Does Not Start - Miele WT 2679 WPM Operating Instructions Manual

Problem solving guide

What to do, if . . .

With the help of the following notes, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,
Repair work to electrical appliances should only be carried out by a suitably
qualified person in accordance with local and national safety regulations.
Repairs and other work by unqualified persons could be dangerous. The
manufacturer cannot be held liable for unauthorised work.

The programme does not start.

Problem
The display remains
dark and the
programme selector is
not lit up.
The display shows:
Machine locked
Enter code.
The programme does
not start when Drain/
Spin has been
selected.
The display is dark.
50
Possible cause
There is no power to
the machine.
The electronic system
lock has been
activated (see Settings
menu J/Lock).
The machine has not
been prepared for
using for the first time.
The display has
switched off
automatically to save
energy (Standby
mode).
Remedy
Check whether
– the mains plug is plugged
in and switched on.
– the fuse or circuit breaker
has tripped.
Enter the code for the system
lock and confirm the entry.
Deactivate the system lock if
you do not wish this message
to appear in the display the
next time the machine is
switched on.
Prepare the machine as
described in "Before using for
the first time".
Press a button. Standby
comes to an end.