Advertisement
To avoid the risk of damage to the
appliance, make sure that the rat-
ing on the data plate corresponds to
the voltage and frequency of the house-
hold supply, before connecting the ap-
pliance to the mains supply. Consult a
competent person if in doubt.
The electrical safety of this appli-
ance can only be guaranteed when
continuity is complete between the ap-
pliance and an effective earthing sys-
tem, which complies with local and na-
tional safety regulations. It is most im-
portant that this basic safety require-
ment is tested by a qualified electrician.
and where there is any doubt the elec-
trical system in the house is checked
by a qualified electrician.
The manufacturer cannot be held re-
sponsible for the consequences of an
inadequate earthing system (e.g. elec-
tric shock).
For safety reasons this appliance
must only be operated as a built-in
appliance. This is necessary to ensure
that all electrical components are
shielded.
Never open the casing of the appli-
ance.
Tampering with electrical connections
or components is highly dangerous to
the user and can cause operational
faults.
8
Installation work and repairs may
only be carried out by suitably
qualified and competent persons to en-
sure safety.
Repairs and other work by unqualified
persons could be dangerous and the
manufacturer will not be held responsi-
ble.
The appliance is only completely
isolated from the electricity supply
when:
– the mains fuse is withdrawn
– or the screw-out fuse is removed (in
countries where this is applicable)
– it is switched off at the isolator or at
the wall socket and the plug re-
moved.
Do not pull on the cable, only on the
plug.
Do not connect the appliance to
the mains electricity supply by an
extension lead. Extension leads do not
guarantee the required safety of the ap-
pliance, (e.g. danger of overheating).
Hide quick links:
Advertisement
