Table of Contents
Advertisement
Function of the sensor
switches
This hob is equipped with electronic
sensor switches. They react to finger
contact.
To operate a cooking zone touch the
relevant sensor. An audible tone
confirms when a sensor reacts to being
touched.
Make sure that only one sensor is
touched at a time (except: when
switching off a cooking zone), and
keep the control area clean. Do not
put things down on it. The sensors
may fail to react or they could
mistake the article or any dirt for a
finger tip contact, thereby activating
a function or even leading to the hob
switching itself off automatically (see
the section on "Safety switch-off".)
Never place hot pans on the sensor
switches. This can damage the
electronics.
Switching on
The hob must be switched on before
any of the zones can be used.
To switch the hob on:
^ Touch the ON / OFF sensor s.
A 0 appears in the display for each of
the zones. If no further entry is made,
the hob will switch itself off after a few
seconds for safety reasons.
To switch a cooking zone on:
^ Select a power setting between 1 and
9 by touching the - or + sensor.
Operation
17
Hide quick links:
Advertisement
Table of Contents
