Microcom 1100 Manual page 5

63 Load text mode control byte
0 Disable auto text mode entry and clear text control
1 Enable auto text mode entry (^B is optional)
2 Enable clear all text on entry to text mode
3 Enable both
64 Load auto-print string count
65 Load Label Centering and Low Density control byte
0 Disable Label Centering and Low Density Compatible Mode
1 Enable Label Centering
2 Enable Low Density Compatible Mode
3 Enable Both
Note: Low Density Compatible Mode is for the M450 only
66 Load Clear EEPROM function
66 Clear EEPROM formats
69 Load Skip Speed
70 Clear 71-76
71 Disable repeat/copies function
72 Enable repeat/copies function
73 Load copies count
75 Load label count
76 Load inner label delay
(The next commands will only function with a single field)
80 Clear 86, 88, 89
81 Disable serial number function
84 Load text string number
85 Load step value
86 Load inc or dec status
0 Disable increment and decrement
1 Enable increment
2 Enable decrement
(The next commands will function on more than one field)
87 Load field number to clear increment or decrement
88 Load field number to increment
89 Load field number to decrement
93 Load control codes recognition status
0 Enable control code recognition
1 Disable control code recognition