Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Flymo MCXT25
Summary of Contents for Flymo MCXT25
- Page 1 Mini Trim ® Contour XT Original Instructions...
-
Page 2: Carton Contents
Plant and Tree Guard Wheel IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. IF ANY PARTS ARE MISSING CONTACT:- Husqvarna UK Ltd. Customer Service Department direct Telephone : 0844 844 4558 UK... - Page 3 13. Remove the plug from the mains : before leaving the trimmer unattended for any period; winding cable for storage. Do not repair a damaged cable, replace it with a new one. Use only Flymo re- before clearing a blockage; placement cable.
-
Page 4: Assembly Instructions
Assembly Instructions Shaft Assembly (A) 1. Locate the lower shaft (A1) into the upper shaft (A2). 2. Grasp firmly and hold steady the lower shaft. Locate the upper shaft and snap together firmly. • The unit is correctly assembled when the gap between the upper and lower shaft has been closed. - Page 5 Using the Plant & Tree Guard The Plant and Tree Guard (J1) allows the trimming of grass close to plants and trees without damaging them with the cutting line. 1. Flip the guard down as illustrated in Fig J1. 2. Use the trimmer around trees (J2) and near plants. How to edge 1.
-
Page 6: Cutting Head
5. Refit the cap. To fit nylon line only: Eyelet • Remember ! Your Flymo Trimmer is designed to use only nylon line with a maximum diameter of 1.5mm. Cleat Use only genuine Flymo nylon line. 1. IMPORTANT - Always wind the line onto the upper sec- tion of the spool first. -
Page 7: Maintenance
Keep fingers and hands clear of the line cutter on leading edge of guard. Caring for your Contour After you have finished using your Flymo Contour follow the procedure below: 1. Disconnect from the mains electricity supply. 2. Never clean your trimmer with water, cleaning fluids, or solvents, just remove debris with a suitable tool, a soft brush or dry cloth. -
Page 8: Fault Finding Chart
Fault Finding Chart WARNING Disconnect from the mains electricity supply before attempting any maintenance or adjustment. FAULT CHECK ACTION Is the automatic line feed Manually feed out line. LINE NOT FEEDING working? SEE “MANUAL LINE FEED” Is the line fed out and visible? Remove cap and spool, free line LINE TOO SHORT Has line been removed from... -
Page 9: Environmental Information
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice. Copyright © 2008 Flymo S.A. All rights reserved. Flymo® and other product and feature names are registered or unregistered trademarks of Flymo S.A.
Need help?
Do you have a question about the MCXT25 and is the answer not in the manual?
Questions and answers