Pattern Selector Dial; Stitch Width Lever - Janome 6019QC Instruction Book

2
2
3
14

Pattern Selector Dial

Turn the pattern selector dial to select the desired
pattern. The selected pattern will be shown in the
pattern indicating window.
NOTE: Raise the needle above the fabric when
1

Stitch Width Lever

1 Slide the stitch width lever to set the setting mark at
the desired stitch width.
The higher the number, the wider the stitch width.
NOTE: Raise the needle above the fabric when
Variable Needle Drop Position
When one of the straight stitches (patterns #2, 23 and
24) is selected, you can move the needle between
center and left needle positions.
3
turning the pattern selector dial.
1 Pattern selector dial
Pattern indicating window
2
1 Stitch Width Lever
Setting mark
2
sliding the stitch width lever.
3 Hole on the needle plate