Threading The Machine; Threading The Needle Thread - Janome 6019QC Instruction Book

1
2
3
4
1
4
2
3
4
7
1
2
3
5
2
6

Threading the Machine

•

Threading the needle thread

* Raise the presser foot.
* Turn the handwheel to bring the take-up lever to its
highest position.
* Turn off the power switch.
Draw the end of the thread with your left hand and
1
pass it under the thread guide (A) then hook
around the thread guide (B) while holding the spool
with your right hand.
Tread guide (A)
1
Thread guide (B)
2
2 Draw the end of the thread down around the thread
guide plate and draw it up.
Thread guide plate
3
3 Firmly draw up the thread up to the take-up lever,
and down into the eye of the thread take-up lever
from the right to left.
4 Thread take-up lever
Eye of the thread take-up lever
5
4 Slip the thread in the needle bar thread guide on
the left.
Needle bar thread guide
6
NOTE: Refer to page 12 for the automatic needle
threader.
11