Dropping The Feed Dog; Adjusting The Foot Pressure; Changing The Presser Foot; Detaching And Attaching The Foot Holder - Janome 6019QC Instruction Book

3
B
1
2
1
1
1
1
6
2
A
1
2
3
2
2
1

Dropping the Feed Dog

The feed dog can be lowered by the drop feed lever
for sewing on buttons, manual embroidery etc.
Push the drop feed lever to the direction A to lower the
feed dog.
Push the lever to the direction B to raise the feed dog,
it will return to the up position when starting the
machine.
NOTE: The feed dog should be in up position for

Adjusting the Foot Pressure

The foot pressure control dial should be set at " 3 " for
regular sewing.
Reduce the pressure to " 2 " for appliqué, cutwork,
drawn work and basting.
Set the dial at " 1 " when sewing the extra fine fabrics.

Changing the Presser Foot

To snap off:
1
Raise the needle and presser foot.
Press the lever on the back of the foot holder and the
foot will drop off.
2 To snap on:
Place the presser foot so the pin on the foot lies just
2
under the groove of the foot holder.
Lower the foot holder to lock the foot in place.
1 Lever
Pin
2
Groove
3
Detaching and Attaching the Presser Foot
To detach:
1
Raise the presser bar and turn the setscrew counter-
3 clockwise to remove it.
Remove the foot holder.
To attach:
2
Align the hole in the foot holder with the threaded hole
in the presser bar and setscrew through the hole.
Tighten the setscrew by turning it clockwise.
1 Setscrew
2 Hole on the holder
Threaded Hole
3
normal sewing.