Pattern Selector Dial; Stitch Length Dial - Janome 2212 Instruction Manual

Janome 2212 Instruction Manual
BH A B C D E
4
3 1
2
A
1
2
www.toews.com
1
A
F G
B C D E F G
S.S.

Pattern Selector Dial

Raise the needle and presser foot. Turn the pattern selector
dial to set the symbol corresponding to the desired pattern
at the setting mark.
1 Setting mark
CAUTION:
Do not turn the pattern selector dial while the
needle is in the fabric, otherwise the needle may
bend or break.

Stitch Length Dial

Turn the stitch length dial to set the desired stitch length at
the setting mark.
The higher the number, the longer the stitch length
Setting mark
1
" " is the recommended setting for buttonhole
stitching.
Adjust the dial in the 0.5–4 range when you sew the
zigzag stitch.
Set the dial at "S.S." to sew the stretch stitch pattern.
If the stretch stitch pattern is not even, turn the stitch
length dial toward "–" to compress it, or "+" to expand
it.
24
2212 Owners Manual/ User Guide