Connecting External Equipment - Toshiba 19EL833G Owner's Manual

Before connecting any external equipment, remove the mains plug from the wall socket.
Aerial cable:...........................................................
Connect the aerial to the ANT. socket on the rear of the
television.
SCART lead:..........................................................
If you use a decoder* or a media recorder, it is essential that
the scart cable is connected to the television.
Before running fi rst time installation, any connected devices
need to be set to standby mode.
The SPDIF Coax. OUT socket enables the connection of a
suitable surround sound system.
HDMI® (High-Defi nition Multimedia Interface) is for using
with a DVD decoder or other equipment with digital audio and
video output. It is designed for best performance with 1080i
and 1080p high-defi nition video signals but will also accept
and display VGA, 480i, 480p, 576i, 576p and 720p signals.
PC format signals will also be displayed.
NOTE: Although this television is able to connect to HDMI
A01_MB60_[GB]_(IB_INTERNET)_DVB-TC_(CT90326)_1007xxxx_5018xxxx_v4.indd 9 A01_MB60_[GB]_(IB_INTERNET)_DVB-TC_(CT90326)_1007xxxx_5018xxxx_v4.indd 9

Connecting External Equipment

English - 9 -
equipment, it is possible that some equipment may not
operate correctly.
A wide variety of external equipment can be connected to the
television; therefore, the relevant owner's manuals for all addi-
tional equipment must be referred to for exact instructions.
If the television automatically switches over to monitor external
equipment, return to normal television by pressing the desired
programme position button. To recall external equipment,
press button repeatedly to switch between sources.
30.03.2011 11:41:44 30.03.2011 11:41:44