Results Displayed During The Throughput Test; Final Test Results; Ito Results Shown During The Test - Fluke Series II User Manual

Frame Size
Select from the following RFC 1242
6.
frame sizes: 64, 128, 256, 512, 768,
1024, 1280, and 1518 bytes.
Frm Len
7.
After entering the above parameters,
press Run Test to start the test.
Run Test

Results Displayed During the Throughput Test

While the Throughput Test is running, the display (Figure
7-7) shows the elapsed test time, current network
utilization (the meter), and the test parameters that were
selected on the Throughput Test configuration display.
The needle indicator on the Utilization meter shows total
network utilization, which includes both the generated
traffic and any other traffic present on the network.
100 Mb
Max Bps
64 32.8Mbps
128 65.5Mbps
256 75.8Mbps
512 86.0Mbps
768 86.0Mbps
1024 90.1Mbps
1280 92.2Mbps
1518 85.0Mbps
ITO – Internetwork Throughput Option
Figure 7-7. ITO Results Shown During the Test

Final Test Results

When Throughput Test is complete, the Network
Assistant displays the final results. Figure 7-8 shows an
example of final Throughput Test results screen, which
includes the following information:
7
Introduction
ace705s.bmp
7-13