OneTouch Series II
Users Manual
IP Trace Route
From the Connectivity Tests display, press
Route) to access the Trace Route screen (Figure 6-2).
Enter a target address by pressing the Target IP Address
box and using the Keypad (see "Manually Entering
Addresses" in Chapter 2). Press
Route and view the results.
Figure 6-2. IP Trace Route
6-2
(IP Trace
to perform the Trace
ace619s.bmp
IP & NetWare Ping
From the Connectivity Tests display, press
NetWare Ping) to access the IP Ping Tests or NetWare
Ping display (Figure 6-3). If you haven't done so already,
press
(IP Config) to configure the Network Assistant
addresses. You can enter addresses manually or use
DHCP (read "Central Setup" in Chapter 2).
Figure 6-3. IP & NetWare Ping Display
(IP &
ace620s.bmp