Fiery EX2101 Installation Manual page 49

1
1-35 Setting up PostScript or PCL printing with Windows 2000/XP/Server 2003
5. Enter the IP address of the Fiery EX2101.
6. Click Next.
The device is detected automatically.
7. Click Finish to close the Add Standard TCP/IP Printer Port Wizard dialog box, and then
click Close in the Printer Ports dialog box.
8. Click Configure Port in the Properties dialog box.
The Configure Standard TCP/IP Port Monitor dialog box appears.
9. If you have LPD printing enabled at the Control Panel, select LPR for Protocol and LPR
Byte Counting Enabled under LPR Settings.
You can also proceed without selecting LPR Byte Counting Enabled under
N :
OTE
LPR settings.