Hard Cutout; Ct1, Ct2, And Ct3; Ce1, Ce2, And Ce3 - Fluke Hart Scientific 9150 User Manual

Press "SET" five times to enter the menu. The calibration parameters menu
contains the parameters Hard Cutout, CT1, CE1, CT2, CE2, CT3, and CE3.
8.12.1

Hard Cutout

This parameter is the temperature above which the unit shuts down automati-
cally. The parameter is set at the factory to approximately 1260°C and cannot
be changed by the user.
8.12.2

CT1, CT2, and CT3

The calibration parameters CT1, CT2, and CT3 are the calibration
temperatures.
8.12.3

CE1, CE2, and CE3

The calibration parameters CE1, CE2 and CE3 are the calibration errors corre-
sponding to the calibration temperatures.
CAL Calibration parameters menu
8 Controller Operation
Calibration Parameters
35