Appendix; Specifications; Appendix Specifications - Teledyne 275R Instruction Manual

Appendix

Appendix Appendix
Appendix Appendix

Specifications

Specifications Specifications Specifications Specifications
Ranges: Ranges: Ranges:
Ranges: Ranges:
Sealed reference gas: Sealed reference gas: Sealed reference gas:
Sealed reference gas: Sealed reference gas:
Zero drift: Zero drift:
Zero drift: Zero drift: Zero drift:
Accuracy: Accuracy: Accuracy: Accuracy: Accuracy:
Response time: Response time: Response time: Response time: Response time:
Sample flowrate: Sample flowrate: Sample flowrate:
Sample flowrate: Sample flowrate:
Area classification: Area classification: Area classification: Area classification: Area classification:
Signal output: Signal output: Signal output:
Signal output: Signal output:
Meter readout: Meter readout: Meter readout:
Meter readout: Meter readout:
Operating temperature: Operating temperature:
Operating temperature: Operating temperature: Operating temperature:
Electrical requirements: Electrical requirements: Electrical requirements: Electrical requirements: Electrical requirements:
Approximate dimensions: Approximate dimensions: Approximate dimensions:
Approximate dimensions: Approximate dimensions:
Approximate weight: Approximate weight: Approximate weight: Approximate weight: Approximate weight:
TELEDYNE ANALYTICAL INSTRUMENTS
0–100% H in CO
2 2
0–100% air in CO
2
90–100% H in air
2
Helium
<1% per day
±5% of full scale or better, depending on
the range selected.
90% in 50 seconds.
0 to 0.5 SCFH.
General purpose (non-hazardous) areas.
0 to 1 VDC.
mVDC output also available.
Integral analog meter.
+32 to +125 °F (0 to +52 °C).
115 VAC, 60 Hz, 115 Watts.
100 or 220 VAC, 50/60 Hz also available.
H × W × D
9 " × 10 " × 14 "
230 mm × 250 mm × 360 mm
analyzer: 10.5 lbs. (4.8 kg).
power cord: 0.7 lbs. (0.3 kg).
Appendix Appendix Appendix Appendix Appendix
A.1