Precautions - Soundstream VIR-7200 Operating Instructions Manual

Notes on Installation
The unit is designed for 12VDC,
negative ground operation
system only. Before installing
the unit,make sure your vehicle
is connect ed to DC 12V negative
ground sys tem.
Be sure to connect the color
coded leads according to the
diagram.Incorrect connections
may cause the unit to malfunc-
tion or damage the vehicle s
electrical system.
Be sure to connect the speaker (-)
leads to the speaker (-) terminal.
Never connect the left and right
channel speaker cables each
other or to the vehicle body.
Make sure all the connections
are completely correct
turning on your unit.

PRECAUTIONS

When replacing the fuse(s), the
re placement must be of the same
am perage as shown on the fuse
holder.
Do not block vents or radiator
pa nels. Blocking them will cause
heat to build up inside and may
result in
After completing the installation
and beginning to play the unit
,
(including
please remove the guard against
theft front-panel at first, and then
press
with pointed
point pen) to
status.
before
1
fire.
replacing the battery),
RESET button on the base
object (such as ball-
set the unit to initial