System Setup - Soundstream VIR-7200 Operating Instructions Manual

SYSTEM SETUP

When you press SETUP button on the
remote control, the setup menu will be dis-
played. It include General Setting,Audio
Setup,Video Setup,Preference Setup,
Password Setup and Exit Setup menu.
1.Within the setup menu, you can use
[ ][ ][ ]
buttons on the remote control
to move the cursor,and then press the
ENTER/PLAY button to make your selection.
[ ]
Press can return to the previous menu.
2.To exit setup menu, you can select the
exit setup menu or press SETUP button.
1. GENERAL SETUP PAGE
Setup TV screen format,video type and all
DVD functions.
1.1 TV DISPLAY
General Setup Page
TV DISPLAY
NORMAL/PS
OSD LANG
NORMAL/LB
WIDE
SET TV DISPLAY MODE
The TV Display which select the different
ratio of display format and the screen of
TV, There are various formats of display
on the screen for different matches between
Disc and TV.
Note:
No matter which display format is sele-
cted, a picture recorded in standard 4:3
format always displays in the 4:3 aspect ratio.
The display format of DVD titles may vary;
please refer to the information that acco-
mpanies your specific DVD title.
A DVD title recorded in 16:9 wide display
format while the TV is a standard 4:3
screen, will result in horizontal compression
of the image .
SYSTEM SETUP
Some DVD titles may be recorded in special
formats. In such cases, the DVD titles will
always appear on the screen in their original
format,regardless of which TV display format
you select.
1.2 OSD LANGUAGE
[ ]
On Screen Display(OSD)Language:Users
can select the whole setup menu and
on-screen display language.
General Setup Page
TV DISPLAY
OSD LANG
SET OSD LANGUAGE
2. AUDIO SETUP PAGE
2.1 SPEAKER SETUP PAGE
Audio Setup Page
SPEAKER SETUP
SPDIF SETUP
Go To Speaker Setup Page
DOWNMIX MODE: sets front speakers to
LT/RT STEREO, V SURR or 5.1CH.
The first 3 settings (LT/RT, STEREO,
V SURR)downmix the sound Signal for
2-Speakers.This setting allows you to enjoy
a surround sound effect with onIy two spea-
kers. For this reason setup for additional
speakers (described in the following sections)
is disabled when DOWNMlX MODE ON. In
this setting, the DIALOG is active.
If you have selected the Dolby Digital
connection and you would like to enjoy true
Dolby Digital surround sound You have to set
the DOWNMlX MODE to 5.1CH. In this
setting, the CENTER, REAR speakers are
active.
17
ENGLISH
FRENCH
DUTCH